0

Fixing loose/bent hands

Your clock has traveled a long way to find its way to your home, and sometimes in the process its hands get misaligned/loose.
This guide will bring you through how to realign the hands, saving you time and money.
Before you read this guide, make sure you have read the first section on how to disassemble your dealer clock.

1. Align all the hands of your clock together, and they should look like this: parallel to each other with enough space between them.

Tip: The hands are all flexible, you can bend them slightly (very gently) with your finger on the tip of the hand to get the clearance you need.

2. If you notice any of the hands touching each other as shown below, you have found the cause of your clock stopping/not keeping time.

3. The first step is to make sure the hands are tightly attached to the center pin by pressing down gently on the attachment point.

Tip: Press down with equal pressure with both hands, and be gentle! The hands are really light and fragile to keep them running smoothly, so please control that super strength of yours.

4. Once you're sure the hands are nice and secure, if you still do notice the hands touching each other, gently bend them to straighten them out.

Tip: Once again, remember to be gentle and use equal pressure on both sides to ensure the hands do not twist. Slow, steady and gentle is the key to this!

5. That's it, you're done! Move the hands through a full cycle to make sure they do not touch each other at any point.

The next section will teach you how to do a quick reset of your clock to make sure it is working as it should.