0

Disassembling your dealer clock

Disassembling your dealer clock is a really simple task, just be gentle and be sure to have clean hands before starting work!

1. Find a soft cloth to lay your precious clock upon so you do not accidentally scratch it while working. Remove the battery before starting work.

2. Remove the screws attaching the back cover to the clock with a phillips head screwdriver.

3. Remove the back cover and set it aside.

4. There will be 4 - 6 retaining clips holding the dial to the bezel. Remove them by gently pressing down on them.

5. The dial mechanism should now be easily removable. Simply lift it up and flip it around to start work! Tip: The glass is now loose, so be careful not to break it!

We're done, what's next?
You can now start work on whatever you wish on the dial, remember to keep your hands clean to prevent any staining.

Should you need to remove the movement, check out Advanced Disassembly/Reassembly

Remember that you will need to reset your clock if you are doing any work on the hands.

Once you're done, go to Reassembling Your Dealer Clock and you're done!